Loading...

QuecLink - GL530MG

GL530MG
This information only is for informational purposes only, Secure GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

The QuecLink GL530MG is a powerful LTE waterproof standby asset tracker designed for asset monitoring and lot management. It is the upgraded LTE Cat M1/NB2 version of the GL500MG, integrating the latest low-power wide area network standards for improved coverage and flexibility. With its innovative power management technology, this tracker offers an impressive standby time of up to seven years, making it one of the longest-lasting devices of its size in the market.

Featuring a waterproof design compliant with IP67 standards, the GL530MG is built to withstand harsh environments. It is equipped with light sensors that make it sensitive to tamper attempts, ensuring the security of your assets. This tracker is ideal for a wide range of applications, including cold chain logistics, warehouse management, cargo trucking, and high-value static asset monitoring. With its internal temperature and light sensors, you can easily monitor environmental conditions and ensure the safety of your assets.

The GL530MG supports rapid and flexible installation with several mounting alternatives. It uses a unique clip-on design to securely attach the device to any asset, providing convenience and versatility. Whether you need to track vehicles, equipment, or other valuable assets, the QuecLink GL530MG is a reliable and efficient solution that offers long battery life, durability, and advanced tracking capabilities.

Outstanding Features:

  • Global LTE Cat M1/NB2 with 2G fallback using unique antenna solution
  • Up to 7-year standby time
  • Waterproof, compliant to IP67
  • Rapid and flexible installation
  • Ideal for asset monitoring and lot management

Technical Specifications:

LTE Specifications EGPRS Specifications GNSS Specifications
Operating Band: Cat M1/Cat NB2 Frequency: EGPRS 850 / 900 / 1800 / 1900 MHz GNSS Type: u-blox All-in-One GNSS receiver
Data Transmission: eMTC (DL) 348 Kbps, eMTC (UL) 1.08 Mbps, NB2 (DL) 121 Kbps, NB2 (UL) 150 Kbps Data Transmission: GPRS 107 Kbps (DL), 85.6 Kbps (UL), EDGE 296 Kbps (DL), 236.8 Kbps (UL) Sensitivity: Autonomous -147 dBm, Hot start -156 dBm, Reacquisition -160 dBm, Tracking -162 dBm

Dimensions: 87 × 51 × 30mm (3.43’’(L) × 2.01’’(W) × 1.18’’(H))
Weight: 140g (4.94oz)
Backup Battery: 3 CR123A lithium batteries, 1400 mAh
Standby Time: 1 report per day (GNSS on) - 5 years, 1 report per day (cell ID only) - 7 years
Waterproof: IP67 compliant
Operating Temperature: -20℃ ~ +60℃
Internal Temperature Sensor: For temperature monitoring, Accuracy: ±1℃
Internal Light Sensor: For tamper detection and ambient light monitoring
Internal Motor: For vibration feedback after successful operation of function button
Magnetic Mounting Case (Optional): For easy installation on metal surface

Interfaces: Function Button (power on/off and working status checking), LTE Antenna (internal only), GNSS Antenna (internal only), LED Indicators (GNSS, Status)
Air Interface Protocol: Command Set @Track protocol command, Transmit Protocol TCP, UDP, SMS
Working Modes: Power saving mode for long standby time, Continuous mode for emergency tracking
Scheduled Timing Report: Report position and status at preset time intervals
Geo-fences: Support up to 20 internal geo-fence regions
Low Power Alarm: Alarm when internal battery is low
Wakeup Report: Report when the device wakes up
Motion Detection: Motion detection based on internal 3-axis accelerometer
Reporting Frequency Adjustment: Intelligent adjustment of reporting frequency

Set Up GL530MG

Country
Carrier
APN
internet.comcel.com.co
User
COMCELWEB
Password
COMCELWEB

To set the tracker send the following commands by SMS messages, the sample setup the device password is nfUH6wmi, this password is the default

  1. Restore factory settings
    AT+GTRTO=nfUH6wmi,4,,,,,,FFFF$
  2. Set the time zone UTC-0
    AT+GTTMA=nfUH6wmi,+,0,0,0,,,,,,FFFF$
  3. Set the operator APN
    AT+GTBSI=nfUH6wmi,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$
  4. Set the GPRS server
    AT+GTSRI=nfUH6wmi,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$
  5. Set the update interval 60 seconds.
    AT+GTFRI=nfUH6wmi,1,1,0,0,,,60,60,60,60,7F,40,0,,,FFFF$
  6. Enable SOS button notification input 2
    AT+GTSOS=nfUH6wmi,2,2,,0,0,0,0,0,0,,,FFFF$